Easy Guide To Painting An Adirondack Chair

I’ve often applied stain and polyurethane to my projects, but Olympic® offers a great one-step solution that let’s me skip the steps of applying and wiping off stain, and waiting for it to dry so I can apply a coat of poly. The product is called Olympic® ELITE Stain and Sealant in One. It’s an exterior product that allows me to show off the wood grain with a semi-transparent finish, while giving the surface waterproofing protection in just one coat. Read on to see how easy it is to apply!

Steps for staining an Adirondack chair:

Step 1: Prep for Staining Ensure the chair is clean, dry, and free of dust. Lay down a drop cloth. Consider placing the chair up on blocks to make it easier to stain the base of each leg. Step 2: Open and Stir the Stain Slowly open the can of stain. Using a stir stick, slowly stir the stain, making sure not to create bubbles, and to scratch the base of the can to mix in any settled pigment. Step 3: Apply the Stain Dip a high-quality synthetic bristle brush into the stain, coating half the length of the bristles. Step 4: Apply the Stain Pull the brush across each board with a sweeping motion. Step 5: Tip-off the Edges As the brush empties, run over the edges at a 45-degree angle to tip off drips. Step 6: Coat the Gaps When possible, work in gaps first and then over flat surfaces. Finish coating the chair, and let dry for 24 hours. If needed, flip the chair once dry to coat the underside, being careful not to drip stain to the finished surfaces.